TPU A80 UV-stabilized (UF-resistant) brand of flexible polyurethane, suitable for use in the food industry. The plastic is highly antibacterial and resistant to ozone.
It has a high chemical resistance to acid and alkali solutions, fats, oils, xylene, diesel fuel. Limited to gasoline, kerosene, acetone, dichloromethane.
For best results, it is recommended to dry before printing for 2-3 hours at a temperature of 60-70°C.
We can print your 3D model with TPU A80
Nozzle temperature 220-240°C
Printing table temperature 60-80°
Blowing the model as needed 20-60%
Print speed 30-50 mm / s
Plastic feed (Flow) 100-105%
Nozzle diameter from 0.25 mm (min)
Min. layer height 0.1 mm
Heat resistance (min / max) -80 to +140°C
Rod diameter tolerance 0.03 mm
Quantity per coil ~ 280 m
Shore Hardness A 80
Elongation at break 500%
Maximum tensile strength 45 Mpa