Wood-like material which, thanks to less fragile enables better feeding of ﬁlament to the extruder. The resulting parts can be machined, painted, varnished and colored, giving you even more opportunities to use this ﬁlament. Appearance of printing enables to use it in art and modeling studios.
- Filament diameter 1,75 mm
- Filament netto weight 850 gr
- easy feeding of filament to the extruder – the material does not break
- possibility of grinding, polishing, varnishing and colouring the prints
How to print?
when using plates or other means to increase the adhesion, the heating of the bed is not required.
to avoid a situation where the nozzle gets clogged with wood particles, we recommend cleaning the extruder after each FiberWood print by using any type of PLA filament
suggested min. nozzle diameter – 0.5mm
|Closed chamber||not required|
|Printing Speed||35-60 mm/s|
|Surface||glass, masking tape|
|Retraction (direct)||2-3 mm|
|Retraction (bowden)||4-6 mm|
|Retraction Speed||20-45 mm/s|
|Drying conditions||50°C / 4h|
|Notes||To avoid a situation where the nozzle gets clogged with wood particles, we recommend cleaning the extruder after each FiberWood print by using any type of PLA filament.
Recommended minimum 0,5 mm nozzle
NOTE: As the FIBERWOOD filament is produced using natural wood, which is part of its components, it is possible that there will be differences between the colour of the individual filament production series.
By the way,we can print your 3D model here